How to Use a 2 Leg Gear PullerLeg Gear Puller.
A gear puller is a must-have tool for any mechanic or DIY enthusiast who works on engines, transmissions, or any other machinery that requires the removal of gears, pulleys, or bearings. One of the most common types of gear pullers is the 2-leg gear puller, which is known for its effectiveness and ease of use. In this article, we will discuss how to use a 2-leg gear puller properly.
Choosing the Right Size.
Before using a gear puller, it is essential to choose the right size for the job. The size of the gear puller refers to the maximum spread between the two legs. To determine the appropriate size, measure the distance between the center of the gear you want to remove and the farthest edge. Select a gear puller with legs that can be adjusted to accommodate this distance.
Positioning the Gear Puller.
Once you have selected the correct size gear puller, position it over the gear you wish to remove. Ensure that the legs are centered on the gear and that they are securely in place. The center bolt of the gear puller should be positioned directly over the center of the gear.
Tightening the Center Bolt.
With the gear puller in position, begin tightening the center bolt using a wrench. As you turn the bolt, the legs of the gear puller will spread apart, applying pressure to the gear you are trying to remove. Continue tightening the bolt until you feel significant resistance, indicating that the gear is being pulled off its shaft.
Applying Pressure.
Once the center bolt is tightened, it may be necessary to apply additional pressure to help remove the gear. This can be done by tapping the side of the gear with a hammer while continuing to tighten the bolt. The combination of pressure from the gear puller and the force from the hammer strikes should eventually free the gear from its shaft.
Removing the Gear.
Once the gear has been successfully pulled from its shaft, you can remove the gear puller by loosening the center bolt. Be sure to do this carefully to avoid any sudden movements that could cause the gear to fall and potentially cause damage. With the gear puller removed, you can safely extract the gear from the machinery.
Cleaning and Storing.
After using the gear puller, it is essential to clean it thoroughly to remove any debris or residue that may have accumulated during the removal process. Once clean, store the gear puller in a dry, secure location where it will not be exposed to moisture or other elements that could cause corrosion.
Conclusion.
In conclusion, a 2-leg gear puller is a versatile tool that can make gear removal a breeze. By choosing the correct size, positioning it properly, tightening the center bolt, applying pressure as needed, and safely removing the gear, you can effectively use a gear puller to tackle a variety of maintenance and repair tasks. Remember to clean and store your gear puller properly to ensure it remains in good working condition for years to come.
If you have any questions about how to use a 2-leg gear puller or need assistance with gear puller selection, feel free to contact us for expert advice and guidance.
For more information, please visit Non-Sparking Impact Sockets 6-Point 1-1/2" Drive, Copper Sledge Hammer with Fiberglass Handle.