The condenser is one of the core components of the chiller system. It is a kind of heat exchanger. It can convert gas or vapor into liquid, and quickly transfer the heat in the tube to the air near the tube to achieve the purpose of heat exchange. The working process of the condenser is an exothermic process, so the condenser temperature is relatively high.
In this type of condenser, the heat released by the refrigerant is taken away by the cooling water. The cooling water can be used once or recycled. Water-cooled condensers can be divided into vertical shell and tube type, horizontal shell and tube type and sleeve type according to their different structural types.
In this type of condenser, the heat released by the refrigerant is taken away by the air. The air can be natural convection, or a fan can be used for the forced flow. This type of condenser is used in Freon refrigeration devices where water supply is inconvenient or difficult.
In this type of condenser, the refrigerant is cooled by water and air at the same time, but it mainly relies on the evaporation of cooling water on the surface of the heat transfer tube to absorb a large amount of heat from the refrigerant side as water The latent heat of vaporization, the role of air is mainly to accelerate the evaporation of water and take away water vapor. Therefore, the water consumption of this type of condenser is very small, and it is the preferred type of condenser for areas with dry air, low water quality, low water temperature, and insufficient water volume. This type of condenser can be divided into two types: evaporative type and shower type according to its structure.
In this type of condenser, the cooling effect produced by the evaporation of the refrigerant in another refrigeration system is used to cool the refrigerant vapor on the other side of the heat transfer partition and promote the latter to condense and liquefy. Such as the evaporator-condenser in the cascade refrigerator.
This type of condenser uses water as a cooling medium to take away the heat released when the refrigerant is condensed. The cooling water can be used once or recycled. When using circulating water, it must be equipped with a cooling tower or cold pool to ensure that the water is continuously cooled. According to their different structures, there are mainly shell-and-tube type and sleeve-type heat exchangers, as well as the more commonly used plate heat exchangers.
This high-efficiency two-stage water-cooled piston condenser ensures maximum output and takes up less space to meet the latest standards. Our piston condensing unit has Bitzer's two-stage semi-hermetic compressor, which is very reliable and of high quality. With an advanced cooling mechanism, the condensing device is the only choice for all customers worldwide.
1. Equipped with Bitzer two-stage semi-hermetic compressor.
2. Imported parts, reliable operation.
2. The condenser in the two-stage water-cooled piston condenser improves the ratio of energy efficiency and cooling capacity.
3. Low evaporation temperature, the evaporation temperature of R22 is -50℃, and the evaporation temperature of R404A is -65℃
4. The best quick freezing unit in the world. Power supply: 380V / 3P / 50Hz.
If you want to get more information about commercial water-cooled piston condensers, please contact us.
If you have any questions on water cooled condensing unit. We will give the professional answers to your questions.