Most devices have tiny electronic circuits in them that can control machines and process information, and electronic components are used to construct those circuits.
An electronic component is any basic discrete electronic device or physical entity part of an electronic system used to affect electrons or their associated fields.
Electronic components have a number of electrical terminals or leads. These leads connect to other electrical components, often over wire, to create a circuit with a particular function (for example, an amplifier or radio receiver).
Basic electronic components may be packaged discreetly, as arrays or networks of like components, or integrated inside of packages like semiconductor integrated circuits, hybrid integrated circuits, or thick film devices.
What Is an Active Component?Active components are semiconductor devices that consist of semiconductor materials. They supply electric power to the circuit or power gain in the circuit. Common electronic devices are diodes and transistors, which perform “active” operations like amplifying, rectifying, or converting supplied current (signal).
Semiconductors are substances like silicon or germanium that have a resistance rate somewhere between a conductor (iron, copper, gold, silver, etc.) and an insulator (rubber, ceramic, etc.).
Semiconductor devices can be classified into:
Passive components are required electronic devices that perform “passive” operations like consuming, storing, or releasing electric power. They can only absorb electrical energy and dissipate it in the form of heat or store it in a magnetic or electric field. They cannot provide electric power or power amplification in an electric circuit. Common passive components include resistors, capacitors, and coils.
The world of electronic components can be summarized with a short list of items. Here are more details on these essential parts of modern electronics.
What are the electronic components? The following components are among the most common found in electronic devices:
What are electronic components used for? Microcomputers are small computers used to control a multitude of devices, such as power tools, remote controls, medical equipment and office machines. Batteries convert chemical energy to electrical energy. The two different cells of a battery are anode (+) and cathode (-).
Fuses help preserve components from overloading with excessive current. A fuse consists of connection body, support, contacts and metal-fuse material such as Zinc or copper. As a protective device, a circuit breaker can be controlled with a remote switch. It is designed to protect the circuit from overloading or a short circuit.
Switches interrupt current. The four types of switches are: single pole single throw (SPST), single pole double throw (SPDT), double pole single throw (DPST) and double pole double throw (DPDT).
Relays are electromechanical switches that shut power on or off. A relay includes an electromagnet, an armature, a series of electrical contacts, and a spring.
Motors convert electrical energy into mechanical energy. Key components include a rotor, stator, bearings, conduit box, enclosure, and eye bolt. From watches, to home entertainment equipment, to vehicles; motors can power a wide array of devices.
What are active and passive components in electronics? Active components include transistors, while passive components include transformers, inductors, resistors, capacitors. Transformers are commonly used to step up or step down power. A resistor restricts current flow. It is used in thermistors and potentiometers. Similar to a low capacity battery, a capacitor allows delays to occur in circuits. Inductors are used to control frequencies.
When building electronic circuits, you will work with a number of basic electronic components, including resistors, capacitors, diodes, transistors, inductors and integrated circuits. Below is a brief overview of the components and their functions.
Resistors: A resistor is one of the components you will come across in an integrated circuit. Like the name suggests, the device resists the flow of current. Resistors are graded based on their power ratings (amount of power they can handle without exploding) and resistance values (capacity to resist current). The measurement is done in units know as ohms. The electronic symbol of the unit is O.
Capacitors: These components can store electric charge temporarily. The components come in different varieties, with the most common ones being electrolytic and ceramic disk. The capacity of a component is usually measured in microfarads (µF).
Diodes: Diodes allow electric current to flow in a single direction only. Each diode has two terminals known as the anode and cathode. When the anode is charged with positive voltage and the cathode with a negative one, electric current can flow. Reversing these voltages will prevent the current from flowing.
Transistors: These components are easy to identify through their three terminals. For the components to work, voltage has to be applied to one of them; the base terminal. The base can then control current flow in the two other terminals (the emitter and collector).
Inductors: These are passive components that store energy in form of a magnetic field. An inductor simply consists of a coil of wire wound around some kind of core. The core could be a magnet or air. When current passes through the inductor, a magnetic field is created around it. The magnetic field is stronger if a magnet is used as the core.
Integrated Circuits: An integrated circuit refers to a special device that has all the components required in an electronic circuit. The component has diodes, transistors, and other devices, all of which are etched on a tiny piece of silicon. The components are used in many electronic devices, including watches and computers.
Microcontrollers: Microcontrollers are small computers used to control a multitude of devices, such as power tools, remote controls, medical equipment and office machines.
Transformers: Built with two coils of wire, transformers are commonly used to step up or step down power.
Batteries: Batteries convert chemical energy to electrical energy. The two different cells of a battery are anode (+) and cathode (-).
Fuses: Fuses help preserve components from overloading with excessive current. A fuse consists of connection body, support, contacts, and metal-fuse material such as zinc or copper.
Relays: These electromechanical switches shut power on or off. A relay includes an electromagnet, an armature, a series of electrical contacts and a spring.
Switches: Switches interrupt current. The four types of switches are: single pole single throw (SPST), single pole double throw (SPDT), double pole single throw (DPST), and double pole double throw (DPDT).
Motors: Motors convert electrical energy into mechanical energy. Key components include a rotor, stator, bearings, conduit box, enclosure, and eye bolt.
Circuit Breakers: As a protective device, a circuit breaker can be controlled with a remote switch. It is designed to protect the circuit from overloading or a short circuit.